TOFU TKL R2
GB date: July 15 - August 15, 2026
Estimated shipping date: Q4, 2026
Customer reviews
Loading reviews…
Product discussion
$65-$6 shipping code: Wafflebetter
Loading reviews…
Loading options...
Configuration preview
Checkout notice
GB date: July 15 - August 15, 2026
Estimated shipping date: Q4, 2026
Please note that due to the nature of the stonewashing process, where metal interacts with stone, some abrasion on sharp corners may occur. This is a normal result of the manufacturing process. We strive to maintain strict quality control; however, it is impossible to completely prevent minor wear on sharp edges. We recommend handling the case with care and avoiding hard impacts to prolong its service life. We appreciate your support and understanding.
Standards for RAW Finish
The RAW version is anodized and uncoated. It preserves the original look of the machined metal, including natural tool marks.
Acceptable Quality Standards (Not covered by warranty):
1. Minor scratches, tool paths, and small speck-like imperfections.
2. Variations in surface reflection or slight dark spots on the raw metal.
(RAW products are not sold as "flawless." By purchasing, you acknowledge and accept the inherent characteristics of this manufacturing process.)
PCB Gasket mount
Engineered for Softness
Following a similar support distribution as the TOP Mount, the PCB Gasket is designed to provide a maximally soft, bouncy, and flexible typing experience.
Plateless Build Potential
Combine this mount with the solderable PCB to assemble your board without a plate. This "plateless" configuration is the ultimate choice for achieving maximum flex and a unique, deep sound profile.
Top mount
Optimized TOP Mount Structure
To minimize resonance and hollowness, the mounting points for the TOP structure are strategically placed to avoid the spacebar area. This results in a more uniform and satisfying sound signature.
Plate-Mount Silicone Dampeners
Silicone dampeners provide complete physical decoupling of the positioning plate from the upper housing. This design mitigates resonance conduction at its origin, significantly reducing structural noise
Wired PCB (Solder & Hot-Swap)
Dive into deep customization with support for AVA, VIAL, and VIA. The solder version also allows for a unique plateless build option.
Dual-Mode PCB
Experience the freedom of wireless with our first-ever dual-mode board powered by ZMK. Its ultra-low power consumption delivers an incredible 6+ months of battery life from a single 1000mAh battery.
HE (Magnetic) PCB
Engineered for victory. We've partnered with NNKS to create a next-gen Hall Effect PCB focused on what matters most: ultra-low latency.
Wired PCB and Dual-mode PCB layout
HE（Magnetic） PCB layout
Only works for WK Case
Real Pictures
VENOM HE PCB is compatible, but we need to use our own daughterboard
The latency is 1.25ms for MX-style switches and 0.125ms for magnetic switches. As expected, the latency in dual-mode (wireless) will be slightly higher than in single-mode (wired).
This pre-order is for our standard color options. However, we also offer a paid upgrade service for custom colors in collaboration with KEZEWA.
Yes, that's possible.
Yes, the design files (for the plate and battery filler) will be released for download after the Group Buy (GB) is completed.
Yes. Our magnetic switch solution supports an adjustable actuation point with 0.01mm increments. While technically it can go lower, 0.01mm is a stable and practical value that represents the physical limit of what most people can perceive. Smaller increments would only create inconvenience when configuring in the software.
Yes, it is a true 8K polling rate. However, considering the varying quality of switches on the market, we have added an option to change the polling rate in the top-right corner of the configurator website. If you are using lower-quality magnetic switches, you can switch to a lower polling rate to calibrate and improve performance.
Our current firmware is based on an open-source solution that does not include a 2.4G wireless component. We believe dual-mode meets the needs of the vast majority of users. Furthermore, this keyboard features an ultra-low-power design, making it exceptionally energy-efficient. (From personal experience, I often lose the 2.4G dongles anyway.)
Available in two height options: choose the taller rubber feet if you use a desk mat, or the shorter ones for direct placement on your desk
Yes, they are compatible
GB date: July 15 - August 15, 2026
Estimated shipping date: Q4, 2026
Please note that due to the nature of the stonewashing process, where metal interacts with stone, some abrasion on sharp corners may occur. This is a normal result of the manufacturing process. We strive to maintain strict quality control; however, it is impossible to completely prevent minor wear on sharp edges. We recommend handling the case with care and avoiding hard impacts to prolong its service life. We appreciate your support and understanding.
Standards for RAW Finish
The RAW version is anodized and uncoated. It preserves the original look of the machined metal, including natural tool marks.
Acceptable Quality Standards (Not covered by warranty):
1. Minor scratches, tool paths, and small speck-like imperfections.
2. Variations in surface reflection or slight dark spots on the raw metal.
(RAW products are not sold as "flawless." By purchasing, you acknowledge and accept the inherent characteristics of this manufacturing process.)
PCB Gasket mount
Engineered for Softness
Following a similar support distribution as the TOP Mount, the PCB Gasket is designed to provide a maximally soft, bouncy, and flexible typing experience.
Plateless Build Potential
Combine this mount with the solderable PCB to assemble your board without a plate. This "plateless" configuration is the ultimate choice for achieving maximum flex and a unique, deep sound profile.
Top mount
Optimized TOP Mount Structure
To minimize resonance and hollowness, the mounting points for the TOP structure are strategically placed to avoid the spacebar area. This results in a more uniform and satisfying sound signature.
Plate-Mount Silicone Dampeners
Silicone dampeners provide complete physical decoupling of the positioning plate from the upper housing. This design mitigates resonance conduction at its origin, significantly reducing structural noise
Wired PCB (Solder & Hot-Swap)
Dive into deep customization with support for AVA, VIAL, and VIA. The solder version also allows for a unique plateless build option.
Dual-Mode PCB
Experience the freedom of wireless with our first-ever dual-mode board powered by ZMK. Its ultra-low power consumption delivers an incredible 6+ months of battery life from a single 1000mAh battery.
HE (Magnetic) PCB
Engineered for victory. We've partnered with NNKS to create a next-gen Hall Effect PCB focused on what matters most: ultra-low latency.
Wired PCB and Dual-mode PCB layout
HE（Magnetic） PCB layout
Only works for WK Case
VENOM HE PCB is compatible, but we need to use our own daughterboard
The latency is 1.25ms for MX-style switches and 0.125ms for magnetic switches. As expected, the latency in dual-mode (wireless) will be slightly higher than in single-mode (wired).
This pre-order is for our standard color options. However, we also offer a paid upgrade service for custom colors in collaboration with KEZEWA.
Yes, that's possible.
Yes, the design files (for the plate and battery filler) will be released for download after the Group Buy (GB) is completed.
Yes. Our magnetic switch solution supports an adjustable actuation point with 0.01mm increments. While technically it can go lower, 0.01mm is a stable and practical value that represents the physical limit of what most people can perceive. Smaller increments would only create inconvenience when configuring in the software.
Yes, it is a true 8K polling rate. However, considering the varying quality of switches on the market, we have added an option to change the polling rate in the top-right corner of the configurator website. If you are using lower-quality magnetic switches, you can switch to a lower polling rate to calibrate and improve performance.
Our current firmware is based on an open-source solution that does not include a 2.4G wireless component. We believe dual-mode meets the needs of the vast majority of users. Furthermore, this keyboard features an ultra-low-power design, making it exceptionally energy-efficient. (From personal experience, I often lose the 2.4G dongles anyway.)
Available in two height options: choose the taller rubber feet if you use a desk mat, or the shorter ones for direct placement on your desk
